Forum: LSX Truck Conversions

Will the new LSXRT intake clear my stock hood. I have a 2001 Sierra that's getting a LS6. The tech from FAST said the LS6 will fit lower??,so I won't...

Well I got started, and with the help of a few people I have been moving this project right along, most of what I have been getting done is prep...

What is TCC? I put a 2002 5.3/4L60E into my 87 Chevy Truck. Was having issues with it bogging bad at acceleration. I hooked up the wire for TCC to...

The 2003 3500 HD we have had a 6.0 that let a rod loose and went thru the side of the block. Since this truck is only used on the farm in a limited...

i posted this here because i will add my progress here later. im finishing up my 5.3 swap in my s10. My question is i have a chance to get a comp...

I have a 2008 Chevrolet Reg. Cab Short Bed with a 4.3 liter V6 and a 4L60e, I would like to swap with a 6.2 Liter L92. First... Is it possible? If so...

I just build this pass winter a 2002 5.3 Lm7 for my truck. its the first motor i built from a bare block. well i went to change oil on it today and...

I purchased an L33 5.3 engine out of a 2005 Silverado to swap into a '91 ecsb chevy. The engine came with wiring harness and ECM. Now I'm scrounging...

I have a 84 c10 that i am installing a 5.3 out of a 1999 chevy pickup. I had a 4l60e transmission built and now have the joy of getting my harness...

My motor is finally in my zr2 im trying to get it popped off this week but im struggling on the steam vent stuff. Im running my stock 02 blazer...

yeah got a deal on parts from a 2003 silverado z71, the question is will the parts fit my 2000silveradoz71.....thx for the help!!!!!!!!!! what about...

I'm putting an LS1 into an '89 C1500 and looking to use dual efans. Any suggestion on factory parts that could be matched up to the stock radiator...

this is what i ended up fabbing since no one makes swap mounts. I used these mounts on the block just kinda curious if anyone has ever...

Well guys I started the motor swap going from 4.3L to 5.3L. I pulled the v6 yesterday and I get to pick the 5.3 up tomorrow. Can someone tell me how...

I am doing a LQ4 4l80e conversion into my 95 1500 CCSB. I am using the cable throttle to keep it a little more simple for me. Right now I am...

Could someone point me in the right direction? Or possibly make a sticky for transmissions? I've read before that different year transmissions and...

im doing a 6.0/60e swap in a 88-98 chevy 1500 and need to know what mounts are better? and what i will have to do about my crossmember for the new...

hi all i got a trans dapt ls1 engine mount adaptor kit see link provided, The plates bolt up to the engine but the new mount that is supplied in the...

Ok, Im starting to make a list of parts for when I eventually need to swap the 6.0 Im rebuilding into my 96 Silverado. So far I plan on budgeting...