Forum: Powertrain

Hey guys need to know what tranny would be best for my setup. Have a 82 single cab C10 Im doing a 5.3 swap and trying to figure out whats best. Its a...

Ok, so I've been a stalker of the forums for a while but finally picked up a 2004 RCSB with a 4.8 and a 5 speed a couple weeks back. I picked it up...

Any recommendations for a good serpentine belt that will handle a lot of power?

Why would the oil level be different in relation to the valve body in different vehicles. I have a 6L80 out of a 2012 Yukon. Full hot on the dip...

This was the first time installing a shift kit, read the instructions over and over, followed them to the letter, read many threads on the install,...

I have a 2004 2500 Silverado non hd. I'm doing the brakes on it and I'm having trouble finding the exact part number for brakes. They say you need to...

So on the way home last night, I felt the truck shudder and about 20 seconds later heard and felt the drive shift brake loose from the rear end....

ok, i have a 1999 silverado that had a 4.8 originally, I swapped in a 6.0 from a 2004 yukon. I used my original intake from the 4.8, but used the 6.0...

Im builing a ls1 for my ecsb, going with ported 799s,nnbs intake, 36lb injectors, im going with a custom grind cam. I still need a complete gasket...

Its been a long time, but here is a bolt in 9" axle. The owner is Brandon Brown of San Antonio Texas. They are available from us, parts will not be...

Guys I am new to this forum. I have been doing some research and would like to know yalls opinion. I have a 2006 Chevy Z71 with the L33 in it right...

we got the 6.0 in a week ago and is doing good! Recap, i have a 1999 ecsb 4x4, originally with a 4.8 that had the leaky castech heads, so i swapped...

Has anyone used or heard any reviews on Midwest torque converters?

I have a 1999 silverado with the 4.8. I am swapping in a 2004 6.0 from a yukon. From what ive read, the 1999 injectors were oddball, then 2000-up...

So I read this article: http://www.ls1truck.com/forums/front-page-news/14163-how-4l60e-4l80e-trans-swap.html and I am unclear on 2 things. ...

I was reading about the castech head cracking problem on the 4.8 and 5.3 engines. The GM bulletin lists 2001-2006 engines. Even though they didnt...

The title might be a little bit off for this post, because I know it will fit. :rolly: But a better question would have been will this engine swap...

ok guys. this has been on my mind for several years and i have yet to find an answer. this prolly isnt the right place to post but idk where else...

What should a person expect to pay for a gear swap? It's for a 2004 Silverado 2500 non HD 4x4. I'm going from 3.73 to 4.56. I've called several shops...