Forum: Powertrain

Originally I had 235/75/16 on my 04 Silverado. I've recently put on 255/70/16, and just like most things, I want to go bigger. I'm thinking about...

about to do a swap in my 05, the 6.0 long block is out of a 05 as well. is there anything that i will need or will all my original 5.3 stuff swap...

Does anyone have any recommindations on a good high flow exhaust set up? i want it to sound good but im not really concered about it as much.

Like the title says. Any sponsors have any file fit rings available for the stock 96mm bore 5.3 blocks? Stock pistons too. It doesn't have to be...

if i were to buy a pair of stock heads off of a junker 5.3, what would i need to port n' polish them? any special procedure to do it, or could i just...

Ok Fellas, this place is always a wealth of information. I have a buddy with a 2001 2500 HD Crewcab 4x4 with 8.1 l and allison tranny. The...

I have recently put a 2 chamber thrush welded (2.5 in) on my 2000 silvy. It sounds good at low rpm's 1200 to 3000. After that it sounds like the...

so im going to put some new gears in my turck. im getting some 410 for it and need some help here. iv built motors, made things drive that couldnt...

about this? 4L60E Mega Monster Transmission Complete Rebuild Kit: 1998-02 - Transmission Parts GM, Chevrolet 4L60E Monster Rebuild Kits - Monster...

I plan on switching from the stock truck intake, to the tbss intake. The one I have comes with injectors, rails and tb. Wanted to know if truck...

I have an intermittent tapping noise (sounds like a pencil tapping a desk slowly) coming from the dash. It only happens when the ac is on and it...

well like a year ago I got my truck lowered by some guy that has his own shop.. Well he really didn't do a good job at lowering my truck...when I go...

I have a question for you guy's . my brother has a 2000 rcsb chevy that he just bought it 2 weeks ago .3 days after i stared making a loud clunck...

so my heater isnt working. it will switch from floor and defrost but is luke warm at best. the blower motor has all speeds. what could cause the lack...

hey guys after lots of reading and thought i decided to purchase sts turbo setup. im installing it on my 06 silverado crew cab with a 4.8L all stock....

so i got a 04 rcsb with 4/6 djm lowering kit, and bought to buy some NNBs 20s and was woundering what size tires would fit, and heck even if...

With ARP bolts? Just got 6.0, a cam, ported heads and LS1 intake. Wondering what I should set my limiter at? 6500 is what I've heard about these...

hey guys im not very good at the rear end gear ratios and stuff so im seeking some advice or help on what gearing to order for my truck, its still me...