Forum: LSX Truck Conversions

Hey guys I have a 99 GMC scsb that has a v6 and I am gonna do a v8 swap so I am looking for a 4.8 or 5.3 or 6.0 it wont let me post in the sale...

I have a 2002 5.3 with drive by wire. I have the PCM (red and blue connection) and TAC, but I did not have the pedal. I purchased a 97-02 corvette...

ok i can probably dig into some old treads to figure most of this out but i figured i would just ask my 5.3 is starting to crap out so im looking...

Hi all i have done a quick search and could not find any info. Currently my 1990 c1500 is a tbi 350 and im am putting a 5.7 ls1 in, just wondering if...

I had a questions about this, it's a 5 speed and I would like to keep it that way, will the 4.3 style clutch work with the 6.0 or what do I need to...

Im looking to swap out my 1998 chevy c1500 with either some LQ (LQ4, LQ9) or an LS base motor. What motor do you sugest would be the easiest/cheapest...

My swap is nearly finished, but i have been putting off finishing my wiring harness for awhile now. my swap is an 02 lq4 out a denali, into an 02...

ok guys i tried the searches but came up empty. it has been a while since i have posted but with all the help i recieved on here doing my conversion...

I gotta 85 c-10 that I want to put a 6.0 in I'm on about a $2000 budget I plan on using a good built 700r just wondering what kind of wiring harness...

i am looking at buying a truck when i get back from the sandy hot oven. found one that i liked but is a v6, what would be needed to swap to a 5.3?...

Im picking up my LQ4 on Thursday, and I'm looking for a 4l80E to go with it. I was wandering if the Pre LS 4l80e's would bolt up fine or would I...

i want some opinions on what i should do, i have a 99 tahoe with the 5.7 with 180.xxx miles in it, had a bad knock that got worse so i parked it, in...

Well i was under the impression that my 4l60e torque converter out of my 02 blazer would bolt up to my lq4 flex plate. Its very close but doesnt...

Hey guys, any advice on engine codes that are best for an engine swap? I want to put a 6.0 or 6.2 into a 79 Chevy pickup with a 5 speed manual. I'd...

Ive got the motor fired up and it runs. Ive got a few wiring problems though. My temp on the cluster is pointed straight down to the floor, not...

Hello, I would like to know what you guy's would suggest for a cam for me. I have a bone stock 6.0 LQ4 with 31K on it, and 317 heads. The engine is...

It is like 85 PSI so i know it will supply the pressure but will the regulator on the fuel rail hold up to that much pressure? I am running an...

ok i have a 1993 suburban 2500 with a 350 and 4l80e. Just had the 80 built about 5 months ago and all runs good. i picked up a 2008 5.3 all...

I have installed an 04 LQ4 in a 92 C1500 with a Novak A/C relocation kit. The owner of the truck is wanting to do a Maggie, most likely a TVS. Has...

I'm having some trouble getting my DBW pedal to work. When i plug the connector in from the TB to TAC module, the butterfly moves around then stops....