All LS Based Conversions
My name is Steven and I am new to the c/10 lifestyle. I have never owned a truck before, let alone a classic one. I recently purchased my 68 Chevy...
I am freshening up my motor after a recent spun main ,been reading about the ls6 pcv conversion a lot of guys swear by on the LS1tech page.Before the...
I built a late 80's 350 with aluminum heads, intake, long tubes, and holley 750 - makes decent power I'd say around 400hp but I really wanted more. I...
I was playing around online and came across the Schoenfeld headers website and it now shows 3 different size headers for LS swapped trucks. There's a...
Seeing some good progress on this conversion by staying very busy on this 3 day weekend. I started the weekend by deciding to tackle the conversion...
Newbe here. I just picked up a 1996 reg. cab short box step side. :hyper2: Has a 4.3 with a bad cam.....so I've been told. I already have a 2008...
Got my swap all done this weekend. Did have the ECM tuned but it must not have been tuned for the mods done to the engine. So, who is a really good...
I've got a 1990 rcsb Silverado 4x4 that I will be putting a l92 with a 6l80 in and I'm having a hard time finding 1-7/8 long tube headers. Anyone...
Hi, I'm getting just about finished with this swap I began in September. Work has really put a damper in my timeline, but so far, all is well, and...
No surprise - the stock 5.3 A/C compressor will not fit my chassis, but I knew this going in. After talking with a lot of different aftermarket A/C...
The back story. I recently swapped a 2001 5.3 LM7 into my 1998 K1500. I rebuilt the engine but reused a lot of the peripheral components. Since...
Hows it going guys, here are some photos of the build. Its almost finished. 6.0, 317 milled heads, full bolt on, cammed, 4l80 , custom harness, e...
hey guys, new to this forum. i've posted on a few others for a while. and asked the same question as well and can't seem to get a bite on it. anyone...
So I know this might be worn out by now and I've done my fair share of research. But it seems there's just a couple things I can't figure out. Let me...
I may have found an LS1 from an 02 Z28 for my 98 Tahoe. I have the Lextech A/C kit which I just realized wont work with the LS1 brackets. Question...
What issues, if any, will I encounter if I decide to to an LS swap and use the matching trans from the donor truck? I want to drop a 5.3 or 6.0 in my...
Bolting an ls1 flywheel into an 06 lq9 but there seems to be a lot of slack on the flywheel, is there an aftermarket flywheel bolt for this set up? ...
Hello. Let me first start by sayin that I have researched and been thinkin about this for a while now. I know I will have guys say, "why" etc. So...
Hey guys. As stated I have a 84 c10 regular cab short box swb truck. I have dual I believe 16 gallon tanks. Now I bought an 87 sending unit with...
There are lots of threads about deleting the existing EGR parts off of our engines, but I haven't seen any information about 5.3 engines never having...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules