Forum: LSX Truck Conversions

i have a 2000 rcsb with a 4.8 and i am putting a ls1 in i need to know what i have to do to make it work i am wanting to put a cam headers intake and...

I put a 6.0 Lq4 in my 1990 chevy K 2500. I replaced the fuel pump with a Master E3270. My engine is running lean. (first it was just the left...

I am in the process of collecting parts as they come along. (Meaning Cheap) For a 98 GMC RCSB 2WD 5.0L Vortec. I built a homemade twin turbo setup...

Sorry if i am asking too many questions but i need to know, lol...Now with the 6.0L...im pretty sure that would bolt right up to my 4l60e but would...

I am planning on just using the manual rack in my conversion. How do I reroute/remove the power steering??? I thought it would be cool to mount a...

I couldnt find exactly what I was looking for in the search. Does the lq4 or lq9 have a return on the fuel rail? If not how can I have a return...

I know the differences in the tranny, but what about the torque converter...can i use a converter from a 700r4 on a TH400?

what is my best bet for fans for my 97 k1500 doind a 5.3 swap and i dont want to use the cutch fan and im doing a ls1 intake swap and the camaro...

well i finally got myself a motor today!!! 2002 5.3 vortec 54,000 miles 800$ im frigen pumped!

What sending unit and fuel pump do i need for an 86?

I've got a complete LS1 that I ended up with, and don't know what to ask for it. It's an '02 Camaro motor, with a light rod knock and good...

is 1000$ shipped to much for a t-56 tranny from a 98 firebird with a ls1 with 88,000 miles lemme know guys! kyle

i have a 04 4.8 in a 83 gmc p/u, I used the factory wiring harness and add a fuse and relay panel to it, I am trying to adapt a 02 gauge cluster...

For some reason, my motor seems to be about an inch too far forward. It won't meet the trans unless I unbolt the trans from the crossmember and move...

Can anyone give me a lead on an inexpensive DBW pedal? So far the prices I've been quoted were in the $150 range. That seems steep to me. Thanks,...

i've done some searching on here for lt headers for the obs to 6.0 swap. I've found, according to some members, that the ls truck headers will not...

alrighty guys let me know what you think. 01 5.3 vortec with just under 60k, comes with complete harness, belt driven accessories, but no pcm, i can...

I'm putting a 5.3l in an '85 4x4 frame and I've got a radiator out of a 2000 Silverado. The fittings in the radiator for the tranny cooler lines are...

although i'm not close enough moneywise to be asking some of the more technical questions. but what i was wondering if anyone else has done this...

:eek: I came across this forum...looking for some info on a LS1 swap. I've read the stickies, and a lot of people around here I see are swapping...