I have a 96 C1500 and am going to swap to an LS1. Are there any parts I can use with the LS, such as the AC compressor, so I know what else to look for?
I have a 96 C1500 and am going to swap to an LS1. Are there any parts I can use with the LS, such as the AC compressor, so I know what else to look for?
Welcome to the site.
Check all the stickies. There is a ton of info. Look at this thread for the AC part... http://www.ls1truck.com/forums/lsx-t...acket-kit.html I still need to bite the bullet and order a kit from him to finish gathering the last piece to get my swap under way.
Been lurking since 09 and I finally have my kickass 6.0 LQ4LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears
Thanks for the info. So just pm the guy about ordering one of these?Originally Posted by capricefrk013
Yeppers. Its a nice looking kit and the only kit I have seen so far.
Been lurking since 09 and I finally have my kickass 6.0 LQ4LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears
Alright thanks again.
I am just about to finish up my swap. I have his kit and will put up some pics hopefully today. Lextec has been extremely
Helpful the whole way through this swap.
Looks good!!!
agreed!! but what the hell are those big ass tank lookin things on your A/C hoses???? and i assume you had those lines custom made?
Like Tumbler in "Gone in 60" I'll drive anything with wheels or without
My 95 ECSB LQ9 build thread - http://www.ls1truck.com/forums/lsx-t...to-95-obs.html
CALI LEGAL ENGINE SWAP!
Stock 03 LQ9, DBW, 95' 4l80e w/ Transgo shift kit, 2010 50# GM injectors, 2800 Circle D stall, Spectre CAI, Upgraded trans cooler, Home-made E-fans/shroud, Dual EP-381 fuel pumps w/Home-made hotwire kit
NEXT ON LIST: Dual Battery setup, CAM/Valvetrain upgrade, Build my own rear mount turbo, TRU-TRAC, HIT THE STRIP!!!
I have a 98 LS1 and I live in Texas, can I use the LS6 intake and pass inspection or am I going to have to use the stock LS1 intake?
Posting Permissions
Reply With Quote
