TVS1900 with lots of extras

[Atomic]

Well, its finally time to sell the blower and go NA for a while since my next project needs funding Blower will be off before the end of the week, just waiting on orings for the injectors.

What you get:
-Magnacharger TVS1900 for cathedral port heads and returnless (03+)
-Magnacharger intercooler pump (bosch)
-Magnacharger heat exchanger for 99-06 with mounting brackets
-Frozenboost 26x7x3.5 heat exchanger (type 101)*
-Magnacharger intercooler resovoir
-2 gallon intercooler resovoir*
-All needed fittings and hoses for the inercooler, pump, and hex (5/8s fittings and hose)
-Magnachager intake tube
-Magnacharger 3.30", 3.00", and 2.80" pulleys*
-Magnacharger HD belt tensioner*
-110" Gates HD belt*
-100mm idlers*
-All necessary hardware and instruction book
-Magnacharger valley cover and tensioner bracket
*upgrades and things not included in the normal kit

What you need
-Bigger fuel pump (although flex trucks might be ok)
-Fuel injectors
-Tune

Background
I bought this blower from Pat (evilgmc) back in January when he upgraded to the tvs2300, and ive been using it since the beginning of April. Blower has a total of about 10k miles on it between Pat and myself, and about a year of use. I made over 400hp to the wheels with this blower and the 3.3" pulley with a cam in my 5.3 through 35" tires and a 14b rear. On my 408 with the 2.8" pulley (which I only ran for 1700 miles), I was making over 600hp to the ground. The blower is in excellent condition and works perfectly. I love it, but I have outgrown it so its time to move on. I made 8.5lbs of boost with the 3.3" pulley on my 5.3, and 11.5lbs with the 3.00". I never tried the 2.8 on the 5.3 but it made 7.5lbs on my 408.

I am keeping my injectors as well as the included walbro fuel pump, so this is a complete kit plus many extras besides those things. The stock 42lb injectors can be had for around $150, and if you are using a return-style fuel system you can use different rails which is not a big deal.

I never had a single issue from this kit and if I wanted a maintence free 100+ hp bolt on, I would buy this kit again in a heartbeat. Magnacharger is also a great company to deal with, very good customer service.

I am looking to get $4500 for everything, OBO. Don't be afraid to shoot me an offer. If you are nearby I would be happy to meet you half way to avoid shipping and/or help with installation.



Thanks

[Atomic]

Bump

I am going to buy some injectors to make this a complete kit if that changes someone's mind.

[Atomic]

Alright guys, lets get this thing gone



I have some 42lb injectors, but they are for the older radix and not the new tvs. I can include them or sell seperately. $250 shipped for them seperate.

The large heatexchanger I will let go for $150 shipped.

Large resovoir $60 shipped.

3.0" or 3.3" pulley for $70 shipped.

Also have some LS1 fans for $110 shipped.

Complete blower kit with everything in the picture including injectors, big hex, res, hd tensioner, blah blah blah, $4350 shipped.
Without injectors, big hex, big res, and 1 pulley - $3900 shipped.
Best way to contact me is to text to 256- two four four - 0416