+ Reply to Thread
Results 1 to 3 of 3

Thread: 2007 5.3 to 6.0 engine conversion

  1. #1
    Join Date
    Aug 2010
    Posts
    9

    2007 5.3 to 6.0 engine conversion

    Here's the deal... My 2007 5.3L is gutless and I am sick of being in the mountains, wind and towing a boat at 3000 plus all the time !! I want to get the most torque and efficiency I can, either out of my motor or a 6.0L Swap. I also want to stroke the 6.0 to a 383 or more. I already have a Garrett hybrid T3/T4 Turbo, 600hp intercooler, oil pump and wastegate. So either I want either use this in conjuction with a stroked low compression engine or I wanna supercharge it. I'm just fed up with the gutless motor I have ! Does anyone out there have any ideas ?

  2. #2
    Join Date
    Jul 2008
    Location
    Racoon Twp., PA
    Posts
    1,572
    Swap out the gears yet? 4.10's, stall, etc...
    2013 CC 5.3
    81 C10 LS1 project

  3. #3
    Join Date
    Feb 2007
    Location
    Sallisaw OK
    Posts
    2,194
    welcome to the site I have a lq4 6.0 bored out to 408 with a kenne bell supercharger 10 psi, it has more power then i need, It has no problem roasting the 38 inch mud tires, maybe you need something similar?
    1996 gmc ext cab short bed
    6.6L 4l80e
    MY GARAGE

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts