i need to put an idler on my motor and i dont have any bushing or any way of centering it. does anyone have any ideas?
i need to put an idler on my motor and i dont have any bushing or any way of centering it. does anyone have any ideas?
1984 c10-its an old truck with an LSX
Since I am not here as much and you have no responses I have to wonder what your issue is...? If you bought the proper part it should have the bushing and bearing and even the bolt in many cases.
it doesnt. ive contacted both gm dealerships in my town and they cant get them either. they can get me the bolt and but not the bushing.
1984 c10-its an old truck with an LSX
post a pic of what you have.
weird, i have never seen one yet without the bearing.
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Pulley-Dayco_3911314-P_806_R|GRPBELTAMS_542615944___
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Pulley-Dayco_3911365-P_808_R|GRPBELTAMS_542612203___
2013 CC 5.3
81 C10 LS1 project
The top pulley is the one i have. i got the bushing now. i got one that worked off of a s10 blazer. i will post a pic for anyones future reference.
1984 c10-its an old truck with an LSX
Jesus Mike...learn how to post a pic...Originally Posted by tanz45
First link pic:
Second link pic:
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
this goes on the back of the pulley it spaces out thte pulley and centers the bolt.
Last edited by bk_cauley; 01-29-2010 at 10:26 AM.
1984 c10-its an old truck with an LSX
wow, of all the engines I've been into I've never seen one of those on a Gen3 powered vehicle. That almost looks like a bandaid someone put on the truck to use an fbody tensioner on a truck.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Can someone pull off there stock tensioner and see how yours is keeping the bearing from contacting the mounting surface and centering the bolt for me please. and this was not a patch up its a factory piece.
fyi its not off the tensioner its the idler pulley.
1984 c10-its an old truck with an LSX
Posting Permissions
Reply With Quote
