Hello all I am new here. My truck is a 1987 Chevy R10 SWB Stepside but I am here because I am installing a LS1 in the truck. I have not had an engine this new sure I will have a lot of questions. But right off i needed to know if the throttle body will interchange from an 03 to an 01 I need the 01 body because it is cable operated. But as you all already know the 03 is electronic. i know they have the same base gasket but will bolt up?
Anyone have an answer to this.. *L* I am looking to go buy the engine tonight. So if anyone has any input i would love to hear it.. thanks a lot.
They will bolt up, but you will need a different harness. Or maybe just delete the dbw wiring from the harness.
"ALisSa1 Silverado"1990 Chevrolet RCSB● 2002 Chevrolet Camaro LS1/4L60EScrimpin Ain't Easy( . Y . )
DBW ?? Sorry I am new to the LS stuff. That is the wiring for the electronic part? If so that will not be a problem i am having it re-done anyway. Thanks alot.
DBW stands for drive by wire or in other words the electronic throttle body.
2006 Superior Blue Trailblazer SS AWD, Stock as a rock
Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).
Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning
yes, they interchange. I have one on a 2006 intake. You have to add a nut to the manifold for the throttle bracket.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote
