Im new to this site and pretty new to fullsize trucks. This is my first swap and I'm really new to these motors. I've done quite a bit of reading on the swap already. I bought the truck in October 2011 and have slowly transformed it. Paid $800 for the truck running and driving. The exterior is almost ready for paint so I decided to do a motor swap for better realiablity and power. I bought a totaled out 02 silverado running and driving for the transplant for $700. The idea was to part it out and snag the motor/tranny. Plans are headers, intake manifold, tb, cam, custom harness, custom tune, stall, and more than likely gears. I already have dirty dingo motor mounts and v8 motor mounts. I want the schoenfeld lt headers, Nelson harness/tune, dirty dingo a r4 a/c mount. I'd like to run the FAST 102 intake manifold and tb but idk if its worth the price versus a 90mm combo or even 92mm combo. As far as cams I'm clueless and yes I've read, but it's over my head lol. I do know I don't want to skimp on cam size. I know I need to get a stall to match. I will post pics here a little later. Any info would be greatly appreciated!