6.0 OBS Swap in California

[Chevy-Art]

-Let's say I go with a pre-made wiring harness, what eventually becomes of the 88 computer and wiring, are they needed to control anything else? (I am going with custom gauge panel)

You won't need your 88 computer, at all. And you will need the wires that go to your gauge cluster. You also don't need the custom gauge panel, unless you really want to use it.

[hamer831]

You won't need your 88 computer, at all. And you will need the wires that go to your gauge cluster. You also don't need the custom gauge panel, unless you really want to use it.

Yea I want to run a Nordskog digital gauge panel. reason being, I do not have any gauges right now and I am building a custom dashboard. I also got a good deal on the gps speedo for it so I dont have to worry about any speed signal from my 88 computer.

So considering I am going to be using this panel, when you said I need the wires going to my gauges, do you mean the original wiring or the wiring from the new truck?
Does the new harness come with the gauge wires?