+ Reply to Thread
Results 1 to 10 of 23

Thread: TBI boy takin the plunge...

Hybrid View

  1. #1
    Join Date
    Nov 2009
    Location
    Fort Smith, Arkansas
    Posts
    496
    Quote Originally Posted by ff_jeff View Post
    Every site I have read points to DBW being the better choice. Most choose DBC for ease of install. TPIS did a dyno on a stock 90mm DBW vs a stock 90mm DBC and the DBW flowed better and made a little more power. If you have a DBW harness, you should run DBW.
    Thanks. That makes a lot of sense and is what I wanted to hear. I didn't know that dbw was better for performance. Seems like if it was good for a few more horses than more people would run dbw.

  2. #2
    ff_jeff Guest
    Quote Originally Posted by flattopwill View Post
    Thanks. That makes a lot of sense and is what I wanted to hear. I didn't know that dbw was better for performance. Seems like if it was good for a few more horses than more people would run dbw.
    No problem man. If it were easier to install a DBW, thats what I would have done. Not to mention you can get a 90mm dbw throttle body pretty cheap. Compared to a 90mm DBC throttle body.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts