+ Reply to Thread
Results 1 to 10 of 11

Thread: Engine swapping

Hybrid View

  1. #1
    Join Date
    Mar 2014
    Posts
    5

    Engine swapping

    I have a 96 C1500 and am going to swap to an LS1. Are there any parts I can use with the LS, such as the AC compressor, so I know what else to look for?

  2. #2
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    Welcome to the site.

    Check all the stickies. There is a ton of info. Look at this thread for the AC part... http://www.ls1truck.com/forums/lsx-t...acket-kit.html I still need to bite the bullet and order a kit from him to finish gathering the last piece to get my swap under way.
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  3. #3
    Join Date
    Mar 2014
    Posts
    5
    Quote Originally Posted by capricefrk013 View Post
    Welcome to the site.

    Check all the stickies. There is a ton of info. Look at this thread for the AC part... http://www.ls1truck.com/forums/lsx-t...acket-kit.html I still need to bite the bullet and order a kit from him to finish gathering the last piece to get my swap under way.
    Thanks for the info. So just pm the guy about ordering one of these?

  4. #4
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    Quote Originally Posted by ChevyPhil View Post
    Thanks for the info. So just pm the guy about ordering one of these?
    Yeppers. Its a nice looking kit and the only kit I have seen so far.
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  5. #5
    Join Date
    Mar 2014
    Posts
    5
    Quote Originally Posted by capricefrk013 View Post
    Yeppers. Its a nice looking kit and the only kit I have seen so far.
    Alright thanks again.

  6. #6
    Join Date
    Jan 2014
    Location
    Las Cruces NM
    Posts
    209
    I am just about to finish up my swap. I have his kit and will put up some pics hopefully today. Lextec has been extremely
    Helpful the whole way through this swap.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts