I bought a cam from a member recently and am unable to find any information on it. I was told it was a 220/222 .581/.581 114 lsa cam made by crane. However every number I run from the cam brings up nothing.
Cam says 3720r/3721r hr 114 and has CC engraved into it.
Havent ben able to find anything on the net but Im assuming it is a Comp cam.
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
So you don't think that stands for Crane Cams?
The numbers dont match the numbers of a crane.
2004 Buell XB12s
I always thought CC = Comp Cam.
I suppose it could be Crane though?
99 C5 cam/boltons 400rwhp
10 Sierra CC 6.2
03 Suburban 5.3
Those are comp cams lobe profile codes. You can find the specs on their site with a little digging.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
go here http://compcams.com/Base/pdf/lobesection.pdf3721 271 222 144 0.342 .065 .052 .513 .547 .581
CAMSHAFT TYPE @ .006 @ .050 @ .200 106° 110° 1.5 1.6 1.7
XE-R for LS1
Rated Duration @
.006" Tappet Lift
LS1 55mm Journal
3720 269 220 143 0.342 .062 .049 .513 .547 .581
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thank you sir.
2004 Buell XB12s
Posting Permissions
Reply With Quote