I assumed it was vacuum related, but haven't found anything. It idles high and surges on occasion. Ideas?
Printable View
I assumed it was vacuum related, but haven't found anything. It idles high and surges on occasion. Ideas?
MAF sensor
LMAO!
No SES?
Vacum leak, intake gaskets, intake cracked, fuel?
Theyre known for intake warpage and gaskets ,I had one ,but i was throwing a code . check all connections.
true you may need to replace the intake gaskets buddy, really need Louis to check the tune out also
Dirty IAC, dirty throttle body, vacuum leaks as mentioned.
Squirel in the intake.
the surge could be from the TPS sensor not reading properly...It could be bouncing from 0-5% and causing it to surge. You got anyone handy with HPtuners to plug it in and check it, or a scan tool..
0507 which I believe is a generic "high idle" or some such thing.Quote:
Originally Posted by tanz45
Your pot stash catch on fire? That might be the cause of your "High Idle" :laugh:
what about 02s? Definitely have Virgil hook up to it and see what the sensors are putting to the PCM.
0507 is the tell tale.
...how so?Quote:
Originally Posted by GasGuzzler
It's not easy to set and not common. The conditions are tight. Call me tomorrow and I'll look it up iffin you wanna...
V has a good idea too to have L look at the chune.
I only understand half of what you typed.
Poor Moze.
I understood all of that one.
get a can of starting fluid and spray around the intake and vac. lines. if it revs up high then you def have a vacuum leak and knnow where to start looking.
Sounds like a technician to me. That's what the PC name is now.
what did you change or what happen,did it pop under a pass ?