live axle conversion

  1. Photo0182

  2. This pictusre shows the new steering dampiner. I had a Painter come out and pint everthing semi gloss. You can also see that there is no I will be...

  3. So in this pic you can see the factory dodge front bakes and the factory chevy abs speed sensors that i removed from the old six lug spindals. I...

  4. In this pic you can see the groun clearence level with the lower axle. Also the wheel base with the new 20x12 wheels it is still covered by the 6in....

  5. This picture is shows the newe dodge axle as wells as the pan hard and the 3/4in. hiem high steer custom steering kit.

  6. Here you can see the new long travel arms. You can also see the new 8 lug wheels to complete the 1ton axle conversion.

  7. Here is a pic of my truck alter we completed the work.

  8. Here is a picture of the side of the truck in the beginning stage of the conversion the center mounted axle braket.

  9. This is picture of the axle with the 3/4 in heim steering kit using 1.5in DOM tubing 1/4 wall it will later be bent and transfered to the bottom of...

  10. This is a picture of the Heim steering.

  11. Here you can see the newly using denali steering box with the drop pitman arm. The reason i did not use an HD box was because it only has a three...

  12. Here i a picture of the axle in place. I was playing around with the movement Before i descided on the pan hard and the steering.

  13. This is the axle i the day i got it. The axle is out of a 2003 dodge ram 2500 4x4.

  14. This is a picture of the long arm kit I developed. The tubes are 2in. DOM 1/4 wall. Attached using John Joints.

  15. This is a picture of the left side of the frame showing the pan hard bar braket. You can also see the new steering box bolts.

  16. Here is picture showing the alighnment of the axle. The axle was pushed forward from the stock location to alow for clearance of the larger 40in...

  17. This is a photo of the new frame mounts. I used 3/8in steel bolted to the frame with 1/2 bolts. it is trusted to the other side of the frame with two...

  18. This is a photo of the axle with the mockup panhard location and the Heim steering kit. You can also see the custom made axle tabes per my own specs....

  19. Front veiw of the truck after the ifs was sawed off the frame aswell as the rack and pinion support braket.
Showing pictures 1 to 19 of 19