+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22

Thread: SAR13th - 408 88mm

  1. #1
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038

    SAR13th - 408 88mm

    We went to the track last night, had a great time while it lasted.

    So this kit/truck laid down 711hp and 847tq on 12psi.

    For the track we decided to turn it down to 8psi since fp was dropping. On 8psi it ran an 11.8sec.
    Between the shop and track, the owner fixed the second fuel pump, so a/f ratio was 10.0 or richer due to a lot more fuel, so that pass was on a very rich tune and only 8psi.

    At the track a boost controller was installed, but around 9psi, a trans line blew, so the night was over.

    We're heading back out to the track tonight with 12+psi, or whatever the fixed fuel system can handle.

    I'm pretty confident with 711hp and all the torque will get us into the 10's, maybe not tonight, but after some fine tuning and adjustments.
    With more timing and more fuel, I think 12psi will put out 800hp. The 711hp dyno run was lean at the top and low on timing, due to the lack of fuel.

    btw, this turbo sounds incredible! It sounds better as the boost is turned up and responds great! Sounds and feels like it would be comfortable right at 20psi.

    So first time out, 8psi, 11sec pass, only got to run it twice.

    more results tonight.

  2. #2
    Join Date
    Mar 2007
    Posts
    1,705
    Quote Originally Posted by farmtruc View Post

    At the track a boost controller was installed, but around 9psi, a trans line blew, so the night was over.

    more results tonight.
    Can I ask what trans TurboMic using?

  3. #3
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Quote Originally Posted by 2boostedSilverado View Post
    Can I ask what trans TurboMic using?
    It's a moderately built 80e. It's been holding up great!

  4. #4
    Join Date
    Mar 2007
    Posts
    1,705
    Great, hope u can push some boost tonight and catch those low 10's, try to post some vids dude.

  5. #5
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Getting closer. Had boost controller issues only gettig 13psi. But running 11.3 @ 119

  6. #6
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Just ran again. I mean a 11.27 lol

  7. #7
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    Damn thats pretty good. I need to up my game. 12's are so last year. haha Nice one.
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  8. #8
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Ok done for the night. Pretty happy with the 11.2 run

    everything went great but back to the drawing board in the search for more traction

    leaving off the line with 1psi isn't going to get us a 10sec run but the truck
    has the potential to.

    Oh btw. He's heading home back to Odessa 300 miles away driving the truck he just raced

  9. #9
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    Nice times...any video of the runs? I bet that turbo sounds good!

    I have to pay more attention to boosting off the line. I'm not good at multi-tasking.

  10. #10
    Join Date
    Jan 2008
    Posts
    8,031
    nice times

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts