+ Reply to Thread
Results 1 to 5 of 5

Thread: clucth kit

  1. #1
    Join Date
    Jan 2010
    Location
    san antonio tx
    Posts
    5

    clucth kit

    need help,im new to site and wanted to know if anybody has any suggestions on a clutch kit for my truck.its a 05 sierrs rst 4.8 ,5 speed manual transmission.or is it time to change to t56,would it fit?

  2. #2
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    If your keeping the 5speed. Centerforce. And you can go t56
    2006 Silverado
    Little Black Bitch

  3. #3
    Join Date
    Jan 2010
    Location
    san antonio tx
    Posts
    5
    is it difficult to change to a t56.

  4. #4
    Join Date
    Jan 2010
    Location
    san antonio tx
    Posts
    5
    i read somewhere that it would bolt right on?

  5. #5
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Simple especially since your starting with a 5 speed truck. Get an LS T56, car flywheel & clutch and pressure plate, slave, and your driveshaft shortened a wee bit, a kit from keisler to get the shifter moved ahead so its close to the 5speed hole, or cut a new hole. There is a swap thread on here and pt.net
    2006 Silverado
    Little Black Bitch

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts