Output Shaft End Play (4L60E)

[RedHeartbeat]

I drilled mine. Was very easy. You have to drill at an angle. Its better to drill at too great an angle than too little, you can always drill from the inside to meet the angled hole. Finding the drills is fun. Go to Graingers to get the drill bits you need. I wrapped them with teflon tape so my hand drill could chuck on the tiny bit. Fastenal also has the number drill bits. I had to ask the better half the Fastenal name. My memory sucks.

[1BADC10]

I drilled mine. Was very easy. You have to drill at an angle. Its better to drill at too great an angle than too little, you can always drill from the inside to meet the angled hole. Finding the drills is fun. Go to Graingers to get the drill bits you need. I wrapped them with teflon tape so my hand drill could chuck on the tiny bit. Fastenal also has the number drill bits. I had to ask the better half the Fastenal name. My memory sucks.

Fastenal?what size bit? guess i'll have to find the thread ya posted that on.

[RedHeartbeat]

Fastenal is a bolt and tool company that is nationwide. A search on the net or your local yellow pages will let you know if you have one of their stores in your area.