Throwing this out there for guys with OBS trucks with GenIII motor conversions… I’m going back to NA for now and am working on another project that I could use some $$$ for.
Wanting to sell my turbo setup minus the turbo and intercooler so including the hotside piping (minus exhaust manifolds), coldside piping (including couplers and t-bolt clamps), downpipe, bov and wastegate. Hotside piping is 304 stainless steel schedule 10 piping and; has two flex couplers to allow for thermal expansion. Downpipe is 3.5” diameter 304 stainless. Wastegate is a Tial 46mm unit with 4 bolt flanges. Turbo flange is t4 with a 3” outlet I believe so any small frame t4 should bolt in. Inner fender required a little massaging after a few heat cycles but nothing too drastic. Cold side piping is 3” diameter mild steel (has some surface rust but nothing that a wire brush wouldn't take care of) and the bov is a 50mm tial unit.
Asking $1099 for the setup including shipping and insurance to the lower 48 states.
For those interested in just the hotside/downpipe setup I'm asking $699 for the setup with wastegate or $299 without
Just pick up a master power or magnum turbo for 500-600 and a cheap ebay intercooler and you have a turbo setup for your OBS truck for less than 2K.
Pics:
to show how intercooler is mounted:
Reply With Quote