saturday nights there is a car show 620 and the 35. in the old albertsons parking lot next to McDonalds. there are very few trucks there PLZ bring some
saturday nights there is a car show 620 and the 35. in the old albertsons parking lot next to McDonalds. there are very few trucks there PLZ bring some
anything fast?
1951 3100
1984 C10
im game
Welcome--sounds like you are having fun with the knock sensors! Eh, they are not that bad. Pretty easy to swap out--it lets you get a little more familiar with your motor! As for the TB bypass--you can do it if you want, but there really isn't a difference. Just use the hose that goes from the radiator to the pass side of the TB and route it to the top of the motor on driver's side. Pretty easy. There are quite a few LS1truck guys down there in the Austin area...ya'll should do a GTG...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Hello and Welcome to the site!
The 18th of Jan there is will be GTG @ SAR @6:30pm if you are interested.
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
Thanks for the greetings and invites.
I was planning on going to SAR for Midnight Madness the 19th, but looks like the new GM intake gasket has a long lead time. I already bought a brand new set from Felpro, but I saw some TSBs about leaky intake manifolds and heard the new and improved GM gasket (part#89060413) is the way to go.
Any thoughts?
Thx!
2000 RCSB 1500 2WD - Stock 5.3L - 18 x 8 Centerline Rims
Go witht the GM gasket. And only go with GM parts when it comes to anything on the motor!
I have not heard anything about our GenIII motors having a leaky intake manifold. Starting in 1997 and continuing into a bit in 1998, the 5.7L Vortec 350 motor had very bad intake leak problems. The leaky intake was fixed when the Gen III motors came out.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
oh yea, there are a few new z06 vettes with the ls7, one has 2 bottles of nos.Originally Posted by duckysbht
a few old school cars that make the ground shake
Cedar Park here...... Yea we all should meet up this Saturday if possible make a showing for the truck crowd.....
Welcome
2004 Silverado
1957 Chevy truck
1953 Ford sedan
1924 model T 2dr hard top
Posting Permissions
Reply With Quote
