first track times since stock

[lownslo]

Well i finally made it to the 1/4 mile and got a few runs in! stock was 15.9

It was warm and the humidity was about 70% so it was a pretty bad day to make runs.
Before i post times I will explain my set up! Its a 6.0 with a kbracing frontmount, 70mm mp turbo, 4" exhaust, z06 cam, and yellow springs/ also a 4l80 with stock tq verter and some 295/50/16 mt et streets II's.

I ran the truck just like i daily drive it on the street, laptop on the back seat, 2 10's under the back seat, some jackets and a change of clothes, toolbox with tools and jack(not the original jack, a floor jack) left the headlight in and the tailgate on!

approx weight of 5100 with me in it.......

1st run:
72 deg 20 minutes after arriving
60' ---- 2.102
1/8 ---- 8.471
1/4 ---- 12.991
mph --- 108.41

2nd run about 45 minutes later approx 68 deg
60' ---- 2.012
1/8 ---- bike tore up the 1/8 and mph
1/4 ---- 12.980
mph --- 108.02

3rd run 1 hour later approx 67 deg
60' ---- 1.958
1/8 ---- 8.302
1/4 ---- 12.813
mph --- 108.91

4th and best about 1 hour later 6:15pm approx 66 deg
60' ---- 1.892
1/8 ---- 8.211
1/4 ---- 12.777
mph --- 107.40

thats the times i have been waiting for, now gotta pull a little weight out and try to get in the 50's with my dd truck! No spray just turbo and motor on 7psi!!!!!

[kbracing96]

Since when is a 170kPa = 7psi,

[lownslo]

haha we did see 165 kpa when we were tuning the other night but it was also 47 degrees too! haha idk my computer took a crap before i could look at the one log i made! so ill know soon what i am looking at! but that is what my gauge said and that is the spring that is in my wg......

[Gladiator 6.0]

congrats on your new times

[oleshifty]

how complete are the kbracing kits? How long did the install take? i want a frontmount, but don't have the time to really fab anything up. I need a full bolt on kit.

PS...nice times!

[RedHeartbeat]

Have you seen Nelson's or Trickflow's kits? The new NP frontmount is cool. He has done a few writeups on here about them. They are complete kits from both companies.

[lownslo]

kyle is a great guy to deal with, his kits come as complete or as bare bones as you want! I think he will sell parts of it or build an entire kit for you. But buying a full fmic kit from him is the overall cheapest way to do it I think! Not taking anything away from other kits though, his is the only one i have run and personally seen! As for install time and all that we did it in a day other than having to chase parts for this and that because i didn't buy the complete kit, it would have saved time and money to purchase a full kit and install and tune the same day and be rolling in about 9 hours!

[ecld_07]

Great times man!

[CHEVROLADE]

damm awesome times man,now get on a diet,,we need vid of it in action

[lownslo]

YouTube - Fastlif vs lownslo.mpg
this was my best pass but man does it look slow....... the gt500 is a kb mammoth and ran a 10.95 @ 126 mph. I went a 12.77 @107