1/4 Mile - LS1Truck.com Fastest Truck List

[ducky]

Fastest Truck List

Rules
1. This list is on a trust level, so most of us trust that you ran those times, so please no BS'ing your times.
2. The list shows the modifications you had when you ran that time, if you have updated your mods since then, I won't change the it on the list until your 1/4 or 1/8 mile time gets updated.
3. Make sure you post updates of your new time on here also.
4. If your not on the list yet and want to be, post up ALL the information for the required fields.
5. If you are an inactive member on here for 3 months you will be removed from the list. Just so it keeps everything cleaned up and up to date.
6. Race weight and horsepower torque is to be inserted at roughly the same time you ran the ET listed. If you dyno more, but haven't updated your time, don't expect me to updated your hp/tq

- I won't round up on decimals
- If you can't figure out what you need to send in the email to me about your information, click on the List, and then the modifications link, and just send as many fields as you can.
- I will update as fast as possible.
- Don't be ashamed if you think you ran a slow time. I'll probably have the slowest for a while, and I made the list.

Thanks guys
David

[Jamest]

I GIVE YOU A TIME SOON WHEN I RUN IT DOWN THE TRACK. PROBABLY A COUPLE OF WEEKS.

JAMEST

[ducky]

If you have two or more trucks or SUV's you would like to enter, just give me the info on both of them including the time, and I will enter them as seperate vehicles.

Thanks,
David

[jethro_3]

Have Red LOCK the other Fastest Lists......

And don't let DamnYankee see my time until his is up for a week

[ducky]

<div class='quotetop'>QUOTE(jethro_3 &#064; Jan 23 2007, 10&#58;27 PM) [snapback]80966[/snapback]</div>

Have Red LOCK the other Fastest Lists......

And don&#39;t let DamnYankee see my time until his is up for a week
[/b]

He and I decided on deleting the post in about a week after most people give themselves a chance to have some input on the list.

[TXsilverado]

<div class='quotetop'>QUOTE(jethro_3 &#064; Jan 23 2007, 10&#58;27 PM) [snapback]80966[/snapback]</div>

Have Red LOCK the other Fastest Lists......

And don&#39;t let DamnYankee see my time until his is up for a week
[/b]

jethro, is that time with your current mods? was there a block under the gas peddle? im honestly not trying to be a jerk, just hinting that there might be something might be wrong with your setup. the 60&#39; aint bad but the 1/4 MPH is pretty dang low for a lq9 IMO. you should be 13&#39;s easily. its almost like it gave up after the 1/8th. whats the dealio?

[farmtruc]

Good job David, thanks for taking this on&#33;

So can we post our times on this thread or do we need to post it on the other Fastest truck thread?

May I suggest, when the "mods" link it clicked, it shows all the mods and the username, can it also include the 1/4 mile data as well, so it will be all on one page?
If that&#39;s too confusing, don&#39;t bother, lol, just keep it as it is, at least we have one now.

once again, thanks&#33;&#33;&#33;&#33;
allen

[jethro_3]

<div class='quotetop'>QUOTE(TXsilverado &#064; Jan 23 2007, 11&#58;02 PM) [snapback]80978[/snapback]</div>

jethro, is that time with your current mods? was there a block under the gas peddle? im honestly not trying to be a jerk, just hinting that there might be something might be wrong with your setup. the 60&#39; aint bad but the 1/4 MPH is pretty dang low for a lq9 IMO. you should be 13&#39;s easily. its almost like it gave up after the 1/8th. whats the dealio?
[/b]

Working on it, working on it....

Seriously it is great from a running start but that 1/4 time was in the low 90&#39;s/ high 80&#39;s. When we were out in Edinburg I could not get it to hook up, had to drive through the water and spun out twice bad and still pulled 14.3.... So yes there is more in it I just need to get it to Allen and let him tweek it. I think I need to get the shift kit in it before I add more power to it..... Remember that is with the 3.73 and factory anchors... 80# tire & wheel set up..... I am sure some forged 18x10 would help lighten up 20#&#39;s per corner and get me there faster

[ducky]

<div class='quotetop'>QUOTE(farmtruc &#064; Jan 23 2007, 11&#58;08 PM) [snapback]80980[/snapback]</div>

Good job David, thanks for taking this on&#33;

So can we post our times on this thread or do we need to post it on the other Fastest truck thread?

May I suggest, when the "mods" link it clicked, it shows all the mods and the username, can it also include the 1/4 mile data as well, so it will be all on one page?
If that&#39;s too confusing, don&#39;t bother, lol, just keep it as it is, at least we have one now.

once again, thanks&#33;&#33;&#33;&#33;
allen
[/b]

I think it would be easier for everyone to go ahead and post the updates with the times and/or mods in is post.

lol I am a little confused at what was said, sorry about that.

[PEDRO]

tune,cai,ud pulleys,headers,3600 stall,efans,trans servo.