+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22

Thread: FS: ATI Procharger

  1. #1
    Join Date
    Apr 2005
    Posts
    4,229

    Arrow FS: ATI Procharger

    I have an ATI Procharger P-1SC with Griffin 3-core intercooler and custom intake piping with the biggest AEM dry filter they make for sale.

    I just took it off my truck last week after blowing the motor (S/C was not affected). I have 4 different pulleys, and 2 of them are Reichard Racing ultra groove pulleys (3.2", 3.6" ) and one stock Procharger 4.0" and 3.4".

    With the 3.6" RR pulley I made between 8 & 10 psi with a Ligenfelter GT2-3 cam (on a 6.0l, it would be more on a 5.3l), depending on the outside temp. With the gigantic Griffin intercooler, IAT's were always about ambient when cruising and only got about 20-30* above ambient on WOT 1/4 mile runs.

    I ditched the FMU (they are junk), so you would need upgraded injectors & tune to compensate (maybe fuel pump or boost pump depending on how far you push it). I ran 60 lbers with a Walbro 255 in-tank pump.

    The system was for a 1999 5.3L, but I ran it for almost two years on my 2004 6.0L LQ9.

    The charge piping isn't pretty, as the powder coating is coming off. It doesn't affect the performance (I have ran this way almost 2 years), just doesn't look good. Also I think the seals need to be replaced on the Procharger (about $300 for Procharger to do it, current 2 week turnaround time). NOTE: It doesn't leak oil, it seeps onto the unit. It doesn't drip, just makes a film. It uses about 1/3 of a bottle of oil between the 6,000 oil change intervals (which I think equates to like 2 or 3 ounces). IT DOES REQUIRE THE PROCHARGER OIL. The Griffin 3 core intercooler had a dent in it from hitting something on the highway, but it doesn't leak or affect cooling in any way.

    Pics are attached, but the intake piping isn't shown because I forgot to take a picture of it.

    Because I consider this a "tuner" kit (needing injectors & custom tune), and the seals need to be addressed, I am offering this for $1,100. Buyer pays all shipping, and if paying through Paypal, add 3%.

    I think I have a great reputation here, so you shouldn't have any worries.
    S.C.







    Gone, but not forgotten!

  2. #2
    Join Date
    Apr 2005
    Posts
    4,229
    More pics:










    Gone, but not forgotten!

  3. #3
    Join Date
    Apr 2005
    Posts
    4,229






    Gone, but not forgotten!

  4. #4
    Join Date
    Apr 2005
    Posts
    4,229
    And again...








    Gone, but not forgotten!

  5. #5
    Join Date
    Apr 2005
    Posts
    4,229
    I forgot to add I will include the Gatorback belt (110.5") that fit with my 145 amp alternator, and 2 other belts. I also have 4 new bearings for the idler pulleys, as well as a 90* elbow from the piping to the throttle body.

    Thanks for looking,
    SCIV
    Gone, but not forgotten!

  6. #6
    wondertruck Guest
    hey bro, i'm at work and the pics wont load up. for that kind of price i almost have to jump on this. can you email me the pics please and your phone number and we can probably get a deal made!

    mtackel@mmmfg.com is my email. thanks!

  7. #7
    Join Date
    Apr 2005
    Posts
    4,229
    Quote Originally Posted by wondertruck View Post
    hey bro, i'm at work and the pics wont load up. for that kind of price i almost have to jump on this. can you email me the pics please and your phone number and we can probably get a deal made!

    mtackel@mmmfg.com is my email. thanks!
    email sent.
    Gone, but not forgotten!

  8. #8
    Join Date
    Sep 2006
    Location
    Coon Rapids, MN
    Posts
    1,219
    Holly Hell that is a hell of a Deal. good luck on the sale SC


    I would love to buy from ya but I cant get my wife to say yes and I told her how much they are brand new

    04 Grand Prix GTP
    03 Z71 wanting a Turbo ,Stall, and Tune BAD
    THE SURGEON GENERAL SAYS NOTHING ABOUT SMOKIN A FORD

  9. #9
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113
    I want it. But id end up blowing the motor liek you did im sure. Awesome price SC.
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


  10. #10
    Join Date
    Apr 2005
    Posts
    4,229
    Quote Originally Posted by Red03SilSS View Post
    I want it. But id end up blowing the motor liek you did im sure. Awesome price SC.
    Then you can build a new motor too!!
    Gone, but not forgotten!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts