Man, you aren't kidding.Originally Posted by ls1ram
Man, you aren't kidding.
Last edited by casias; 01-31-2013 at 03:21 PM.
Depends. Drag racing wasn't my plan for this truck. But i will probably do test and tune night. It is going on the dyno in a couple of weeks.Nice job BTW
Do you plan to run it down the 1/4 mile?
Last edited by casias; 01-31-2013 at 03:22 PM.
[QUOTE=casias;505663]The swap that has Mopar guys pissed.
About a year ago, we ran across a 1999 Dakota R/T with bushing and ball joint problems, and picked it up from the auction for $2000. It turned out, it also had cracked heads, which is a common problem for the 5.9 Magnum engine. Initially, we intended to use a 408 block, new heads and a Kenne Bell blower to give this truck 400 or so HP.
Out came the engine:
Using a foam mock-up block and wood plates, we developed adapter plates to fit the LY6 engine into the engine bay:
And the engine dropped in nicely
Hey Scott it looks like you didn't even clearance the cross member and that's a stock pan!
Posting Permissions
Reply With Quote
