Jeff, so I'll have to do is cut plugs of the dbw harness for throttle body add the wires you have shown with new plugs and I should be good
Jeff, so I'll have to do is cut plugs of the dbw harness for throttle body add the wires you have shown with new plugs and I should be good
The DBW only has 2 wires going to the PCM. The rest of the wires in the DBW T/B connector go to the TAC Module (If I remember correctly). So, you need to run 7 wires from the PCM to the IAC and TPS.
Jeff
98 GMC RCSB 2wd, 100% internally stock 305, w/twin T-3 junkyard turbos,Ramjet intake w/42lb inj,12200411 PCM. 4675lbs w/me in it. Best time in 5 passes 13.01@110
yes sorry for delay been busy, and yes makes question is answered. Went junk yard and git the connectors I needed for the tps and iac and will wire in soon.Originally Posted by Lextech
Posting Permissions
Reply With Quote