truck charging voltage too low truck did not want to start can i keep factory pulley
truck charging voltage too low truck did not want to start can i keep factory pulley
00 silverado 5.3, 2005 caddy clip,mods asp pulley,e-fans,3.73s,custom intake,jba shorties,hypertech=14.9@95
What is the size of the alternator pulley you have?
02 Silverado
02 TrailBlazer
<div class='quotetop'>QUOTE(twobit @ Mar 20 2006, 01:47 PM) [snapback]47517[/snapback]</div>it is about half an inch bigger than stockWhat is the size of the alternator pulley you have?
[/b]
00 silverado 5.3, 2005 caddy clip,mods asp pulley,e-fans,3.73s,custom intake,jba shorties,hypertech=14.9@95
Get the smaller alternator pulley if you want voltage, if you want power you need to go with the bigger alternator pulley, I just put the small one on my truck along with the Underdrive Pulley and it gave me a voltage boost. It has worked great and it is only like $25 from summit racing. the bigger pulley will take more RPM's to charge your alternator, so if your idling you might have to REV your truck to keep it alive.
Good Luck
![]()
06 TrailBlazer SS LS2 4.10's
02 SC StepSide Factory Orange
Full Bolt-On 370 - Little Cam- Victor Jr Intake -Worked 5.3 Heads - 4.56's - Built 60E - Circle D 4000
07 CTS-V CAI, GM Performance Exhaust, Ported TB, Coil Overs
<div class='quotetop'>QUOTE(bulldog5.3 @ Mar 20 2006, 01:52 PM) [snapback]47519[/snapback]</div>I second that.Get the smaller alternator pulley if you want voltage, if you want power you need to go with the bigger alternator pulley, I just put the small one on my truck along with the Underdrive Pulley and it gave me a voltage boost. It has worked great and it is only like $25 from summit racing. the bigger on will take more RPM's to charge your alternator so if your idling you might have to REV your truck to keep it alive.
Good Luck
[/b]![]()
Tattoos, Kustoms, Chops, Guns and Pits..........Need I say more? AFTERLIFE KUSTOMS.
Getting ready to put an 82 Chevy 1/2 ton blazer under the knife.
EL JEFE
ROUGHNECK
Hell yeah!!!! Overdrive that alt. pulley!! LOL!
02 SCSB Z71:E-fans/nelson harness,ASP crank & alt,Volant ramair/k&n,UPD lid,Mac perf tube & elbow,Por & pol bbk 80mm TB/bypass,Meziere elec H2O pump,48# injectors,160 stat,LS6 intake,224/228,.581/.588,110šsep.,Dart 205's,Supermaxx header system,Corsa Sport,MSD 8.5 & coils, NGK #6(indexed), Built 60E,Fuddle 3400/cooler,custom alum ds/billet trans & pinion yolks,Weld chyenne 6D's, BFG kdw's, Nelson SD tune.
<div class='quotetop'>QUOTE(chevrolade @ Mar 20 2006, 01:32 PM) [snapback]47513[/snapback]</div>its defective....ship the pulley my way and ill ship you a rollpan for your truck backtruck charging voltage too low truck did not want to start can i keep factory pulley
[/b]![]()