Smith Racecraft Assassin Traction Bars

[CHEVROLADE]

http://www.srdparts.com/index.php?pa...emart&Itemid=1


The bounce don't have anything to do with the bars...I have the fix for that too though

this is the only reason i bought cal tracs to take care of the wheel hop i had....it took care of it......
what else could take care of wheel hop cause im thinking on selling these cal tracs

[00Z71]

Don't throw them on expecting to dead hook on the street if you make any kind of power. I was doing a pimp juice burnout and then leaving on motor dead hooking. By the time i sprayed it off the line there was a decent amount of rubber down. There is a ton of adjustments on these bars, you'll just have to find where your setup likes it best

Just to let you know, i have removed my overload and trimmed the second spring about an inch and reclamped it to get everything where it needs to be. You don't have to do this and may not even need to, but i did

I know what you mean, I am just looking for a little improvement.
What tire are you using?

[slowxcab33]

Danny, If that felt slow..... I just hope one day my truck feels as slow as yours taking off on motor. Cause it looked like a beast!!!!

[Chris@LSXPS]

this is the only reason i bought cal tracs to take care of the wheel hop i had....it took care of it......
what else could take care of wheel hop cause im thinking on selling these cal tracs

It does eliminate wheel hop, One of the big reasons I built mine. I have a setup similar to Caltracs that I build for flip kit truck or for stock height truck.

[CHEVROLADE]

how did these perform?i tried calling to see if they had for my 08' with flip kit