DIY harness modders here please

[81chevys]

i did my own harness according to lt1swap.com but i dont really like the fuse panel and relay setup they used.

im looking for something a little more attractive and weathertight. Anybody got any suggestions?

i used a doorman uni fuse panel and a couple of relay sockets from an electronic store (moser i think)

it looks like it should work but id like to see what u guys have thanks

[danger_ranger83]

I have my fuse block exactly like the one on lt1swap except I used 2 fuse panels and I haven't had a problem out of them

[vortecyota]

The best looking setup I have found is from currentperformance.com. They are 104.95 shipped. There are some pics of it in my thread titled "Some of my conversions" in this forum. Good luck man!

[88stepside]

I used one from the donor car, 2004 GTO. It had the capacity to add extra circuits for lights, relocation of fuel pump relay, and future nitrous. I would check out your local pick-a-part and see if there is a factory fusebox that you can adapt.

[81chevys]

i see the currentperformance one.

any others

i thought about using the one from the donor truck but ive cut it all off now and i would really would prefer something smaller.

[wayoung]

I used the stock one from the 97 just picked up an extra box to get some extra pins