OEM cop stuff

[michaelweston1@yahoo.com]

or you could spend that money on actual mods to make more power instead of tricking the dyno. you cant feel bigger dyno numbers but you can 40hp... a can of wd40 is real cheap just spray the rollers down and get some wheel spin going for numbers!!

Go put a set of 22's on your truck, do a burnout, then put some 18's on your truck and burnout... your can feel the difference, i had 22's at one point, now im at 18's, and wanna go to 17's

[1BadCC]

Not sure whatyou mods are but I have 22s on my truck and dont have a problem burning out at all, but then again ive got some help. beingblueeyes i was gonna say the same thing earlier but figured it was a loosing battle.

[kerrige]

Yeah he didn't say you can't do a burnout with 22's he just said there is a difference in the ability. The increase in weight of the rotational mass makes the vehicle some what slower. Just by switching from 20+ inch rims to lighter 16 or 17's many have seen improved times at the track not just on the dyno. Even if I don't agree with some of what has been said the logic is correct smaller lighter wheels many times equals a quicker vehicle.

[1BadCC]

Yeah i know. I got a set of 17s im going to put slicks on for the track. Was just saying for some trucks or cars the difference wont be as big

[michaelweston1@yahoo.com]

Not sure whatyou mods are but I have 22s on my truck and dont have a problem burning out at all, but then again ive got some help. beingblueeyes i was gonna say the same thing earlier but figured it was a loosing battle.

Burnouts have never been a problem for me, I have pretty much full bolt-ons, CAI, vette servo, shift kit, eaton posi, 4:10's, full exhaust, nelson tune, upgraded wires.... etc, I was just saying it makes a big difference with smaller rims and tires

[chevrolet all the way]

Go put a set of 22's on your truck, do a burnout, then put some 18's on your truck and burnout... your can feel the difference, i had 22's at one point, now im at 18's, and wanna go to 17's

i went from 20s to 16s on my truck and didnt feel a difference. but then again it was just a 4.8 so idk if that helps...

[CHEVROLADE]

i used to run the oem size tire on my 17s..they are 265/60 17s...i know myuncle is a DPS and has the TAHOE ....i could get u the vin if you wanted to oreder the center caps...also has the 140mph cluster

[michaelweston1@yahoo.com]

i used to run the oem size tire on my 17s..they are 265/60 17s...i know myuncle is a DPS and has the TAHOE ....i could get u the vin if you wanted to oreder the center caps...also has the 140mph cluster

I was looking into those 140mph clusters, I was wondering if they would be accurate or not. I had my needle burried so I went to the gps and was at 142mph with the rpms at 5600.

[chevrolet all the way]

good god what road did you find to get that truck up to 142mph with those mods???

[kerrige]

haha come on now thats not that tough to do.....