Which Cometic Head Gaskets for 5.3

[Bigschwerm]

Im going to be installing a set of P/P 243 heads milled .040 on my stock 5.3l bottom end ,to run while i build the LQ9.

Cam is a Lunati voodoo 222/228 .567/.567 113 + 4

I want to run a set of thin Cometic head gaskets...what part number do i need?
The smallest bore size i seen was a 3.910" is that ok to run a standard 5.3l bore?

[phantom405]

I may be totally wrong, but I don't see why not. They have the same bore centers...I very well could be wrong though. Maybe someone else will chime in

[Frenchy]

GM replacements are the same between the 5.3 and the 5.7, look at your old ones they should have 5.3/5.7 marked on them towards the rear if I remember right.

[bangbangskeetskeet]

GM replacements are the same between the 5.3 and the 5.7, look at your old ones they should have 5.3/5.7 marked on them towards the rear if I remember right.

Mine only said 5.7 but they were the exact same size as the stock ones I took off.

[Bigschwerm]

Thanks for the info gents! Just wanted to make sure before i dropped the coin on them.