ok
cats outta the bag.. i just placed an order on a block to build a 408 for the SS.
anyone think im gonna need bigger injectors? i got 42lbers in there now.
ok
cats outta the bag.. i just placed an order on a block to build a 408 for the SS.
anyone think im gonna need bigger injectors? i got 42lbers in there now.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Might as well go ahead and do it. 60s wouldnt be a bad idea
1951 3100
1984 C10
ok but do i NEED to...
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Not really sure, but I don't think over doing it on a 408 fuel system setup would kill you. I mean you are already dropping dime on just getting the motor done.
1951 3100
1984 C10
that is true.. but im hoping to not spend money on it where i dont HAVE to.. ya know?
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
they arent very used.. for my truck they just went on in september.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
What's your IDC now?
2006 SilveradoLittle Black Bitch
A friend of mine runs a 6.0L stroked to a 402 and with 42#ers, his IDC is about 78%. He runs 11.3 in the 1/4 mile on spray, BUT, he is naturally aspirated. If you plan to boost that 408, you'll need 60#ers - at least
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
i do not PLAN on boosting
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!