Ls1 Silverado Project in the works

[rdchvytrk]

Her is the new plan. Found a local shop that works on fuel injection wiring, The shop will take the body connectors from the 4.3 and the engine harness from the LS1 and graft the two together.

Any suggestions

The shop specializes in smog legal engine swaps. The mechanic I talked to swears it will pass smog.

[rdchvytrk]

Looks like I will be spending $550 on the wiring grafting, I will be taking both 4.3 and LS1 harnesses in to this shop later this week (payday)

Open to sugestions from any body that has done an LS1 swap

[Sleeper]

Painless is only $508 shipped. and to your door in a few days complete with VATS bypass and all. ask me how i know

turn around and sell that harness you got from the f-body on ebay...i got $160 outta mine, so really i only paid about $340 for my painless.

[rdchvytrk]

Looks like I will soon be dealing with Dynatech

[farmtruc]

Hey, great decision on Dynatech, I've been chatting with him and he's really into his customers. He's honestly here to help out.

So what are they doing to the harness? Are they leaving the 4.3L pcm or just going with the LS1 pcm?

What's you timeline and when do you expect to complete your swap.

The results are going to be well worth it!!!


good luck,

allen

[Dynatech]

We have done a couple of silverado V6 to LS1 wiring convertions. I noticed your main concern is Smog compliance.
We can make this work for you and pass the reffere test with 100% OBDII compliance.

[HRV-LS1]

Read your information about the engine swap. Are you sure you cannot put in a better engine into your truck if it wasn't available from the factory in that year? I'm from California too, and want to install

an ls1 into a 95-98 gmc truck. Will I be able to do that?

[Chevy-Art]

This thread is 7 years old, the member was last on here; Last Activity 10-23-2003 12:59 AM. But someone else will be able to answer that for you.

[twgoodspeed]

have fun i'm doing the same to mine as we speak, my 99 silverado rcsb was a v6 and is now a ls1 power house with no motor mounts...i'm curently waiting on the v8 mounts to get the motor off of the frame then the fun hopefully will start.