+ Reply to Thread
Results 1 to 8 of 8

Thread: ls s10

  1. #1

    ls s10

    i posted this here because i will add my progress here later. im finishing up my 5.3 swap in my s10.
    My question is i have a chance to get a comp cam for $50 but not to sure bout the numbers

    its 3712r/3717r

    from what i have looked up its 0.563/0.571 218/228 114

    just wondering if this would be a good cam for a stock 5.3 4l60e setup. right now its on the stock stall
    and rearend. once i post the vid on here you will see.
    plans are a 8.8 rearend, cam, nitrous, and stall.
    93 ECSB...lq4 6.0 swap, 255 walbro,cai, ported tb, shorty headers, 3" exhaust, tune,electric fans, NX wet kit 100 shot, 2/4 drop, beltech shocks, boss 335 22's, 295/30/22...looking for a cam.

  2. #2
    heres the vid, not sure if it works. im at work where theres no player installed.

    http://www.youtube.com/watch?v=JAUvUXS-nPM

    just got the exhaust done...2 1/2 y-piped into a 3" flowmaster dumped before the axle.
    93 ECSB...lq4 6.0 swap, 255 walbro,cai, ported tb, shorty headers, 3" exhaust, tune,electric fans, NX wet kit 100 shot, 2/4 drop, beltech shocks, boss 335 22's, 295/30/22...looking for a cam.

  3. #3
    where did you get that coupler for the steam vent tee into your upper radiator hose?

  4. #4
    i made it. 1 1/4 steel pipe, drill a hole, welded a nut and installed a 1/4" brass fitting.
    93 ECSB...lq4 6.0 swap, 255 walbro,cai, ported tb, shorty headers, 3" exhaust, tune,electric fans, NX wet kit 100 shot, 2/4 drop, beltech shocks, boss 335 22's, 295/30/22...looking for a cam.

  5. #5
    Anyone?
    93 ECSB...lq4 6.0 swap, 255 walbro,cai, ported tb, shorty headers, 3" exhaust, tune,electric fans, NX wet kit 100 shot, 2/4 drop, beltech shocks, boss 335 22's, 295/30/22...looking for a cam.

  6. #6
    did you bead roll the steel or not?

    i would try to run a real mild cam if you dont have a stall converter or supporting mods.

  7. #7
    No didn't roll it, no leaks tho. I have a coupler on my 93 swapped lq4 and leak free over a year now. The cam is hard 2 pass up for $50. I plan on doing a converter and rearend later. Of course springs and push rods 4 the cam also. Its not 2 far from an ls6 cams specs
    93 ECSB...lq4 6.0 swap, 255 walbro,cai, ported tb, shorty headers, 3" exhaust, tune,electric fans, NX wet kit 100 shot, 2/4 drop, beltech shocks, boss 335 22's, 295/30/22...looking for a cam.

  8. #8
    go for it bro, if your not hard core about rippin track times than there is no reason to worry about it.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts