does anyone have a pic or can take a pic of the stock gauges at operating temp with the truck running? I attempted the led comversion and got my needles all out of wack and didnt take a pic before i took it apartI know now that was a dumb move ...... can somebody snap a pic for me please its a 2004 1500 if that makes a difference.....
Thanks in advance
if you have access to a computer, use scanning software to set them. That's what I did on the silverado, cuz gauges are pretty inaccurate from the factory.
blown transmissions are about as useful as 97% of the guys on this forum
I have access but idk what you are talking about. Can you tell me what to do?
open up the software...view the digital gauges on your laptop. it'll say "coolant temp 192*" or whatever. The 'glass' portion of cluster comes off pretty easy. pop needle off, put it at '192'. Move onto next gauge. Mine used to read 210 CONSTANTLY, and digital readout would say like 192-195, so I moved needle. Just pop it off, and put it on where you want it.
blown transmissions are about as useful as 97% of the guys on this forum
ok got ya but where is the scanning software? What site?
Last edited by 04silverz; 10-01-2010 at 06:10 PM.
The software is something you buy. Such as HP tuners, EFI live, LS1 Edit. Ect ect
Name: Mark,
God created turbo lag so nitrous trucks could have a chance.
http://www.ls1truck.com/forums/my-ga...tml#post274877
I have a DS Predator will that work?
Posting Permissions
Reply With Quote
