Amp to door speakers?

[6.0vortecchevy]

Is this what i should buy?

http://www.google.com/products/catal...CAcQ8wIwADgA#p

[lo-lyf]

Get a dual amp kit. It will have a distro block to run power to both amps.
I wouldn't run any speakers in the rear. Spend the money on a nicer set of components instead. Bridge your 4 channel for the front components or bi-amplify the components using all 4 channels.

agreed. get a nice set of components (Diamond Audio, JL Audio, MB Quart), and forget the rears. You more than likely won't notice them gone.

Is this what i should buy?

http://www.google.com/products/catal...CAcQ8wIwADgA#p

that one should be okay depending on the size of your sub amp.

[oleshifty]

Ditto on ditching the rears


I actually just put a set of Alpine Type R 6.5's in my Blazer...I'm in LOVE. Million times better then my old Pioneers, which were a million times better then stock.

[RUFFNECK]

I still have my rears with some added tweeters and can fade them in and out and tell a difference, meaning I can still hear them. I like hearing the music around me instead of in front of me. Just sayin with the added amp and good speakers, you can hear them.

[PitchBlackC3]

You can hear them, that's the point of getting rid of them. They are mucking up the fronts.

[RUFFNECK]

Well I guess for me it works since Im 6'6" and have to sit way back to fit in an ext. cab.

[lo-lyf]

I hear my rears too, I'm only 5'10" but I G-ride so my head is usually even with my b-pillar. I will be adding a set of the same Diamond components in the rear doors just to have them back there so I have better sound(maybe), but I don't feel they are absolutely necessary given the price of a set of good components. I do sometimes like to say: go all out or go home.....

[RUFFNECK]

I hear my rears too, I'm only 5'10" but I G-ride so my head is usually even with my b-pillar. I will be adding a set of the same Diamond components in the rear doors just to have them back there so I have better sound(maybe), but I don't feel they are absolutely necessary given the price of a set of good components. I do sometimes like to say: go all out or go home.....

Yeah they aren't in the best spot but at least for me Im ok with them. I know some have even cut the speaker opening bigger to where a pair of 5x7's could mount in there.

[6.0vortecchevy]

Will i be ok with a 4g power wire with 2 amps, one 400 and the other is 1000?

[lo-lyf]

Yeah they aren't in the best spot but at least for me Im ok with them. I know some have even cut the speaker opening bigger to where a pair of 5x7's could mount in there.

I've done many pairs of 6.5's only issue is mounting depth, 4x6's (or any oval in my opinion) is a waste. The only 4x6 I've ever liked are the plate type that have a 4" round and a tweeter.

Will i be ok with a 4g power wire with 2 amps, one 400 and the other is 1000?

Probably not unless you are using 4g to each from a 1/0 and distribution block or 4g each from the battery. The 400 would probably be okay on good 8g.