any total prices yet?
any total prices yet?
05' silverado 1500 4.8
AEM brute force intake
flowmaster muffler
exhaust cutout
superchips programmer
throttle body spacer
"If you have enemies, Its because you stand up for what you believe in."
Ok, got some updates.
This truck was built on a budget, by Jon, so i'm not sure what it all costs, but you can get a good idea on new parts:
Cam kit: around $700
Shorties: $250-400 (no cats)
Magnaflow: $100 (muffler only)
CAI mod: free (cut bottom of box out)
Free KN filter
Yes, finally at the Shootout this last weekend.
14.3 sec @ 94mph
Not sure how that stacks up, but I say pretty good for a geared, cammed, shorty, exhaust 4.8L.
That beats an SStruck, VHO, and most stock TBSS', hell at SAR even hangs with the stock 2010 Camaros lol. Also beats a Hemi, Ford L and a lot of other stuff, just from some simple mods.
Ya, this 4.8L has the ASA cam. The 5.3L build got the 220 cam.
Just an fyi, the 08 truck we did with a smaller cam, 218 and shorties laid down 317hp, so they are right in line with the classic trucks, but i think they make a little more HP.
later,
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
i will definatly be goin this route for my 4.8, seems like a little fun DDing power
[CENTER]
KandN INTAKE
44 SERIES FLOWS DUMPED
SUPERCHIP(UH)
4/7 LOWERED
18'' TITANS
Did anyone notice the baseline power for the 4.8 is a little higher than the baseline power for the 5.3 in this thread?...
http://www.ls1truck.com/forums/front...in-budget.html
I'm new to these trucks, will a stock 4.8 run with or outrun a stock 5.3?
Last edited by Fasglas; 05-01-2010 at 07:14 PM.
1969 Chevy RCLB C10 350/TH400 SOLD
2007 Chevy RCSB 4.8 4x4 LS SOLD
2008 Chevy RCSB 5.3 4x4 LT SOLD
2010 Chevy CCSB 6.2 4x4 LT SOLD
2005 GMC CCLB DRW 6.6 Duramax 4x4 191,000 and counting
2013 FORD CCSB F350 6.7 Powerstroke 4x4
Great thread.
I just happened across a 4.8 rclb dirt cheap and after reading this thread, I'm considering something I never did before, which is buying a 4.8.
Keep us posted on any additional add ons.
I may have missed it, but what gears are in this project truck?
99 C5 cam/boltons 400rwhp
10 Sierra CC 6.2
03 Suburban 5.3
It currently has 4.10's in it, but I'm not sure at the time of the dyno, originally it had 3.73's.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
http://truck.xtremeownage.com/images/dyno/SANY0026.JPG
http://truck.xtremeownage.com/images/dyno/SANY0028.JPG
http://truck.xtremeownage.com/images/dyno/SANY0029.JPG
This is what i was able to squeeze out of my 04 4.8 with the help of a little boost. I ran out of fuel pump....
Last edited by ericmck2000; 06-12-2010 at 02:07 PM.