6.0, 80E, 4.10's, and Frt mount turbo

[Warsteiner]

What do you guys think... almost completed the swaps. I decided to do everything at once. 2005 ECSB 4wd... 02 6.0 LQ4 all stock with front mount turbo 76mm with a low mount IC. Fresh Built 2004 4L80E with a Circle D 265mm 2800 stall, extra clutches and a sonnax shift kit. My transfer case with a new input to match the 80e. 4.10 swap from 3.42's. Nelson tuned...
I have yet to get injectors and a fuel pump ... what do you guys suggest? "Might possibly" go to a 80 or 88mm in the future and shoot for about 750-800.
My truck has the 39 lb denso's and stainless rails right now off of my 5.3 L59. Can i support any boost at all on these? Say 5psi or so? Are these fuel pumps bigger from the factory being a flexfuel truck?

[pl4yboy]

60 lb injectors, Aeromotive A1000.

[Warsteiner]

Whats the best place to get denso injectors??? My truck had the 39 lb denso's and stainless rails... Will an internal pump not work? such as a 300lph walbro? Not skimping out here.. but i just dumped over 7000 in this swap in last 2 months... its gonna be a while on the A1000 and lines!