so on the intake manifold, where the EGR thing goes in, what is everyone using to block off that hole? especially in boosted apps...
so on the intake manifold, where the EGR thing goes in, what is everyone using to block off that hole? especially in boosted apps...
01 Silverado
almost positive the dealer sells a kit that was used in the HD trucks, if I remember correctly it's only like 15 bucks and bolts in
blown transmissions are about as useful as 97% of the guys on this forum
i can't think of the name of it to save my life but at most of your parts stores they have a rubber plug with a nut on the back and when you turn the nut the rubber swells out. thats wat i put in mine
2008 GMC Sierra SLE....370ci LY6 with some goodiesSOLD
1995 C2500- LS1 swap with a mp112
build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html
ive got the rubber plug thing now, but i feel like something thats just squeezed in there wont be good with lots of boost
anyone have the P/N for the plate thing?
01 Silverado
Should be this number!
Part# 12558346
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
hehe. wd-40 cap works
R.I.P Blue '02
'08 - 5.3
Vette Servo, Flowmaster 40
Posting Permissions
Reply With Quote
