evap system

[liftedsierra00]

I'm in the middle of swapping my 5.3 out og my 2000 gmc sierra. Just had a quik question as to what to do with that evap canister that was bolted to the intake manifold. Would i be able just to put a breather on it for the tank any help would be awsome.

[GasGuzzler]

The EVAP canister is under the bed.

[liftedsierra00]

ok then my next question is what is that sensor at the front of the intake manifold. it has a fuel line running to it.

[PitchBlackC3]

That is the EVAP solenoid. Why do you need to do anything with it? You are putting the engine in something else or putting in a new engine?

[liftedsierra00]

im putting in a 6.0 with the edelbrock pro flo intake thats why im confused

[banker099]

i took the evap line out and put a filter on my canister under my truck...

[liftedsierra00]

ok cool thanks just needed to know it that would work

[farmtruc]

Just attach a hose to the sol and take it to the intake man port so it all works like it's supposed to.

[sprayedenali]

i just ripped ALL of the EVAP stuff off...


people that arent running the solenoid in the stuck manifold, what are you doing to plug up the hole?

[banker099]

plastic weld...sealed it up...no vac leaks

edit, the hole on the l92 intake is quite a bit smaller than the99-06 manifolds, might be able to use a freeze plug ...