Go to home depot or lowes and scout the PVC section and get some ideas. Easiest would be sticking with the stock box with a drop in filter and PVC pipe to the TB.
Go to home depot or lowes and scout the PVC section and get some ideas. Easiest would be sticking with the stock box with a drop in filter and PVC pipe to the TB.
Axekick tuned, Pacesetters, Servo.
I'm currently in the process of making mine. I'll do a build thread for you. For starters I have a stainless piece of 4" bent from a muffler shop to get the basic geometry. Next I shopped around for a few hi-temp silicon 45's and 90's to route it where I want. I'm using header wrap and sealer with two layers of header wrap to insulate the pipe. For connecting the fittings to the pipe, use the recommended stainless/nickel straps that are sold with the silicon fittings. Note: the hi-temp silicon fittings are those that may be found at VatoZone or most autoparts stores where ricers stack up their Bling.
Sweet sounds good man. I am going to home depot today to look at some tubing and get some price ranges.
2002 4.8, MSD Ignition, 2" Rear Lowering, dual magnaflows, custom cai.
Waiting: Nelson Tune, Lt, 2/4 drop, high flow cats, TSP Custom Grind Cam
you can get the spectre pieces from o'reilleys. probbably like 75 bucks in piping plus whatever a filter cost
'02 Silvy: Z71 EC Step Side 5.3L Nelson tuned
2013 GMC Acadia: SLT1 Carbon Black
1976 Corvette Stingray: Trying to save it, progress is slow.
^Ricky's Sweet PS Skilz
09/21/2010 02:31 <danger_ranger83> I'm not really worried about the looks...I want it to be fast and ugly...bc no one wants to get outrun by something ugly
there 's schedule 20 pvc at mcoys , it very thin and works . just have to glue it with clear epoxy. let me go get a pic.
heres the pic
it works well and whistles like the others ,but it alot cheaper. the pipe is easy to id becuase it has a black lining on the inside and the fittings are thin .
all you need is a short raduis 90 with a female and male end, a 45and about 3ft of pipe . this will set you back about $15 good luck.
Sweet that sounds good. Thanks alot
2002 4.8, MSD Ignition, 2" Rear Lowering, dual magnaflows, custom cai.
Waiting: Nelson Tune, Lt, 2/4 drop, high flow cats, TSP Custom Grind Cam
Thats a hot air intake.....
I just cut the resonators off of the oem pipe and welded the plastic back together with a soldering iron to make mine. Some sanding, filler and paint made it look good.
99' Silverado RCSB Z71: 5.7L Iron LS1, 11.2:1, Custom EPS Cam, Ported 862's,Ported TB, E-Bay Cold Air, E-Bay Long Tubes, Dynomax X-Pipe Exhaust, Electric Fans, Innovative LC-1, Self Built 4L60E, Circle D Pro Single Disc, 4:10 ValueTrac
that looks alot better than the last time i saw it, didn't you use a paint cap for a while?Originally Posted by country_3030
I just cut the resonators off of the oem pipe and welded the plastic back together with a soldering iron to make mine. Some sanding, filler and paint made it look good.
MY GARAGE - http://www.ls1truck.com/forums/my-ga...ns-garage.html
2004 GMC Sierra - RCSB
Posting Permissions
Reply With Quote
