Needing a good low/mid cam for my stock 5.3

[07_Silverado]

well I am wanting to cam my 07 nnbs.. my mods are in the sig. no motor work has been done. it lacks on the bottom end even with the 4.10 gears so I am wanting a good low/mid cam. any suggestions on cams you guys have seen in action and perform well? also reccomendations on where to purchase. Thanks guys/gals!

[sand man]

im not an expert but i saw M3SRT's truck and i beleve in his cam choice as i had this cam in mind even befor i saw his vids,and he proved me right

spec

TSP 220\220 of duration , .581\.581 of lift , and 114+2 lsa

with bolt ons he did make this

YouTube - 2007 2008 2009 Silverado Driveshaft EXPLOSION on Dyno Too Much Power

[chvy=power]

check on the thunder racing website they have all sorts of diff cams for all types of applications

[truckinL33]

Comp LSR cam: 215/224 .604/.610 112 107. Makes the best low/mid torque on desktop dyno, without leaving too much to wish for at the top end.

[Botlfed]

gotta be careful with that much lift.

[truckinL33]

I know it's kinda high lift, but that's what the cam specs are from Comp. It should be ok for clearance though, right?

[Botlfed]

pretty sure that wont work in a 5.3

[Frenchy]

It will be very very iffy in a 5.3, depending on the valve events. And ditch the handheld.

[CHEVROLADE]

i got a custom speced cam with more lift than that for the 4.8
it will be fine with supporting springs/pushrods

[07_Silverado]

I did ditch the handheld.. lol I just got my computers from Nelson Performance last week. put them in today. feels better now except for trans slipping on 1-2.. lol guess my tranny build will come sooner than thought!