Hey guys . So I replaced my regulator recentlt and it has a very hard time going up . Does any one know how to adjust it ?. Thanks in advance
Dead Man
01 silverado 1500 ext cab
Hey guys . So I replaced my regulator recentlt and it has a very hard time going up . Does any one know how to adjust it ?. Thanks in advance
Dead Man
01 silverado 1500 ext cab
What makes you think I wont stab you
2001 4.8 ext cab reg bed 2wd
Boo nobody ?
What makes you think I wont stab you
2001 4.8 ext cab reg bed 2wd
check the voltage
Did you replace the regulator AND motor? or just the regulator?
Big slow mud truck with a TUNE!!!!!!
Both .
What makes you think I wont stab you
2001 4.8 ext cab reg bed 2wd
Yeah comes as one whole UNIT. You really can't put em in crooked or anything what I would do is unclamp the window and slide it up. Does it move freely? If so hold the window up and then operate the motor to see how it does on its own. Breaking the system down may help you out. One piece at a time.
Please don't hit the window and break it though.
2013 CC 5.3
81 C10 LS1 project
Rockauto.com sells the pieces separately or as a whole unit. But, yeah, do what tanz45 said and work it out one piece at a time.
Big slow mud truck with a TUNE!!!!!!
Thanks guys I will try that out and let you know .
What makes you think I wont stab you
2001 4.8 ext cab reg bed 2wd