I just put 24s on 305s on my truck and am considering putting on a drop and was wondering which brand and if I can fit my wheels and tires with a 2, 4?
I just put 24s on 305s on my truck and am considering putting on a drop and was wondering which brand and if I can fit my wheels and tires with a 2, 4?
should be good with a 2/4, measure the top of your tire to the bottom of the wheel well and see what you come up with i bet its alot more the 2/4.
2003 SIERRA- 5.3 DD
1985 SWB C10- slow, future plans- shaved, painted, 6.0/4l80e
What year?
.
.
.
.
.
.
.
2008
I know somebody knows about a drop!
could probably do 2/4 to a 3/5 on a nnbs.
any will work. mcgaughys ground force djm belltech
04 5.3
224/224 .566 .566 114
3200 Circle D
LT's
60e
Nelson Tuned
p1sc in closet
I just want something that will ride good.
same as mine the 305's will rub big time anything below 2" in the front.
I'm 2 - 4 and my 24 x 295's rub slightly in certain situations.
Please have them use tape weights on the inside AND OUTSIDE lip, it may be a little ugly but it will ride smooth as glass, I had 3 shops all bragging I can balance it with weights on the inside and I couldnt get over 30 40 before it would shake all over the road. I can run 80-90 -100 and no shimmy at all, 1 rim and tire only needed 1 once to ballance out. but needed 8 ounces by balancing it only on the inside. both inside and out are called dynamic balancing and one side is static balancing.
Heres a pic. I think thats 2 ounces.
Last edited by 1fastchevy; 03-23-2010 at 11:12 PM.
.
.
.
.
.
.
.
Posting Permissions
Reply With Quote