need some help desiding

[Frenchy]

I'd build a 382 if I were you

[cjcalhoun]

382 what bore and stroke is that im going to drive the truck alot

[Frenchy]

Thats boring it out to 5.7 with a 4" stroker crank

[cjcalhoun]

im prolly going to just go iron 5.7 with 243 heads and small cam nothing to huge and a little shot of nitrous thanks for all your help

[PitchBlackC3]

I would buy both. Get the 5.3 for all the covers and parts. Get the 6.0 to build up a 370 or 408 and use all the parts from the 5.3 with it. Sell the 5.3 block for $80 and you got the covers and parts for free.

That sounds like a decent plan right there.

[cjcalhoun]

ive decided what im going to do buy the complete 5.3 then bore it to 3.898 and run ls6 pistons and rods wich should be the full floating wrist pins. what years had the factory floating wrist pins. how does this sound to you guys