i understand how to hook it all up going on my rear brakes. what im wanting to know is what size inverted flare is it to screw into the abs under the cab. going to use an adapter and run a 4 an brake hose to the line lock. just need to know if its metric or standard thread on the fittings. thanx
also how many amps does a typical line lock carry just wondering if i need to run a relay
anybody
Just a few amps. The fuse is 10A. A good switch will carry the load fine.
2006 Superior Blue Trailblazer SS AWD, Stock as a rock
Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).
Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning
thanks any idea on the fitting size for the abs im going to run a braided 4 an hose from my abs to the line lock then just bend and reflare the other end to the line lock
Posting Permissions
Reply With Quote
