cam install

[lilredls1]

installing the cam in the 4.8 is there any special procedure ive never installed a roller cam? and will the stock lifters work?

[skeet]

your stock lifters will work,

heres a how too

LS1Howto.com


its for a f body but 90% of it will work the same way

good luck and hope it all works out well for ya, just make sure when you install it you be extremely carefull not to ding the lobes, and make sure you double check the marks when installing the timing chain

[CHEVROLADE]

ive done like 3 cam swapa already on my 4.8,,really easy,,nuthin to it.get u some 5/16 rods to hold up the lifters before u pull the cam out..and get a torque wrench