+ Reply to Thread
Results 1 to 4 of 4

Thread: Newbie Here

  1. #1
    Join Date
    Dec 2009
    Location
    Northeast Montana
    Posts
    1

    Newbie Here

    Well I'm a newbie here. My name is AJ. Don't have much to say I have a 2001 Chevrolet silverado 1500 4x4 with a 5.3 that i would like to convert to a 6.0 with a
    4L80E transmission plan on doing it pretty soon cause my pickup is about to hit 200,000 miles. I do alot of hauling with that 5.3 and 4L60E Tranny so would like to have more horse and torque and still be able to afford the gas to drive to work. I work on a ranch in northeast montana that my family owns. If anyone has any advice on the engine and tranny swap it would be appreciated. Going to do the swap as cheap as possible since i have other bills than my truck.

  2. #2
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Welcome! The swap you are talking about isn't that bad, but the conversion to an 80e 4WD will be quite tough. Unless your truck will see tons of track time, you could get away with a 6.0L and a fully built 60e. Would prolly be cheaper and less of a hassle....

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  3. #3
    Join Date
    Oct 2009
    Location
    Rio Grande City TX.
    Posts
    220
    welcome
    2004 Silverado:THELSX L.M.E LSX 454 C.I tuned by Llavero 11.1 N/A @121 MPH
    2004 Sierra:GUNSLINGER L.M.E LSX 427C.I,Twin Borg Warner/Forced Induction 76mm, th400, Ford 9" with ladder bar

  4. #4
    Join Date
    May 2008
    Location
    Schertz, Tx
    Posts
    2,539
    Welcome to the site!

    07 Z71 4x4, 6.0L, 3.73s, Turbonetics T76 @ 10 psi, 75 shot, Snow meth kit, PLX DM-100 wideband gauge, Nelson tune, Comp 212/216 .557/.561 114 lsa, 60# injectors, Yank 3000, 4L80E , Magnaflow - dumped, e-cutout
    Line-X, Pace Edwards Full Metal Jackrabbit bedcover

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts